Pipa Paduan Nikel

Production Information : Alloy AISI 4140 PLATE Characteristics − The combined effect of the chromium and molybdenum contents ensures excellent hardenability with uniform properties. In the heat treated condition, plate exhibits strong abrasion and wear resistance as well as good impact and fatigue properties Typical Applications − Recommended for use in high stress, abrasion/wear resistant applications such as gears, oil tools and machine tool components Condition − As rolled

Production Information : Alloy 4130 Characteristics − We stock this quality of E-4130 to meet the regulations of API Spec.6A. − Bars are heat treated to Designation 75K and are Charpy V-notch impact- tested to Classification K. − Stocks also conform to NACE Standard MROI- 75 with a maximum hardness of HRC22/HB235. E-4130 is readily machineable and weldable. Typical Applications − Flanges, wellhead components, tool joints, etc. Typical Heat Treatment − Forging − Commence 1200

Production Information : OFFSHORE - WIND POWER - ENERGY Steel designation according to EN: • steel for tubes for mechanical treatment: steel E355 + AR, E 355 + N E – steel for machine parts, 355 – minimum yield strength in N/mm2, +AR – heat treatment is not required, +N – normalising annealed or formed steel 20MnV6 steel designated by chemical composition – guaranteed mean C content 0,20%, guaranteed content Mn and V +AR – heat teratment is not required, +N – normalising

Production Information : OFFSHORE - WIND POWER - ENERGY Steel designation according to EN: • steel for tubes for mechanical treatment: steel E355 + AR, E 355 + N E – steel for machine parts, 355 – minimum yield strength in N/mm2, +AR – heat treatment is not required, +N – normalising annealed or formed steel 20MnV6 steel designated by chemical composition – guaranteed mean C content 0,20%, guaranteed content Mn and V +AR – heat teratment is not required, +N – normalising

Production Information : OFFSHORE - WIND POWER - ENERGY Steel designation according to EN: • steel for tubes for mechanical treatment: steel E355 + AR, E 355 + N E – steel for machine parts, 355 – minimum yield strength in N/mm2, +AR – heat treatment is not required, +N – normalising annealed or formed steel 20MnV6 steel designated by chemical composition – guaranteed mean C content 0,20%, guaranteed content Mn and V +AR – heat teratment is not required, +N – normalising

Production Information : OFFSHORE - WIND POWER - ENERGY Steel designation according to EN: • steel for tubes for mechanical treatment: steel E355 + AR, E 355 + N E – steel for machine parts, 355 – minimum yield strength in N/mm2, +AR – heat treatment is not required, +N – normalising annealed or formed steel 20MnV6 steel designated by chemical composition – guaranteed mean C content 0,20%, guaranteed content Mn and V +AR – heat teratment is not required, +N – normalising

Production Information : OFFSHORE - WIND POWER - ENERGY Steel designation according to EN: • steel for tubes for mechanical treatment: steel E355 + AR, E 355 + N E – steel for machine parts, 355 – minimum yield strength in N/mm2, +AR – heat treatment is not required, +N – normalising annealed or formed steel 20MnV6 steel designated by chemical composition – guaranteed mean C content 0,20%, guaranteed content Mn and V +AR – heat teratment is not required, +N – normalising

Production Information : OFFSHORE - WIND POWER - ENERGY Steel designation according to EN: • steel for tubes for mechanical treatment: steel E355 + AR, E 355 + N E – steel for machine parts, 355 – minimum yield strength in N/mm2, +AR – heat treatment is not required, +N – normalising annealed or formed steel 20MnV6 steel designated by chemical composition – guaranteed mean C content 0,20%, guaranteed content Mn and V +AR – heat teratment is not required, +N – normalising

Production Information : OFFSHORE - WIND POWER - ENERGY Steel designation according to EN: • steel for tubes for mechanical treatment: steel E355 + AR, E 355 + N E – steel for machine parts, 355 – minimum yield strength in N/mm2, +AR – heat treatment is not required, +N – normalising annealed or formed steel 20MnV6 steel designated by chemical composition – guaranteed mean C content 0,20%, guaranteed content Mn and V +AR – heat teratment is not required, +N – normalising